Home › Legislation
UK UK Construction Products (designated)
UK designated — 444 entries. Source: ds-construction-products-list-v02.ods. Snapshot: 2026-08-16.
| Annex | Reference | Title | Withdrawal |
|---|---|---|---|
| Regulation (EU) No 305/2011 | EN 1:1998 | Flued oil stoves with vaporizing burners | |
| Regulation (EU) No 305/2011 | EN 40-4:2005EN 40-4:2005/AC:2006 | Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns | |
| Regulation (EU) No 305/2011 | EN 40-5:2002 | Lighting columns — Part 5: Requirements for steel lighting columns | |
| Regulation (EU) No 305/2011 | EN 40-6:2002 | Lighting columns — Part 6: Requirements for aluminium lighting columns | |
| Regulation (EU) No 305/2011 | EN 40-7:2002 | Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns | |
| Regulation (EU) No 305/2011 | EN 54-2:1997EN 54-2:1997/AC:1999EN 54-2:1997/A1:2006 | Fire detection and fire alarm systems — Part 2: Control and indicating equipment | |
| Regulation (EU) No 305/2011 | EN 54-3:2001EN 54-3:2001/A2:2006EN 54-3:2001/A1:2002 | Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders | |
| Regulation (EU) No 305/2011 | EN 54-4:1997EN 54-4:1997/AC:1999EN 54-4:1997/A1:2002EN 54-4:1997/A2:2006 | Fire detection and fire alarm systems — Part 4: Power supply equipment | |
| Regulation (EU) No 305/2011 | EN 54-5:2017+A1:2018 | Fire detection and fire alarm systems — Part 5: Heat detectors — Point heat detectors | 01/01/2021 |
| Regulation (EU) No 305/2011 | EN 54-7:2018 | Fire detection and fire alarm systems — Part 7: Smoke detectors — Point smoke detectors that operate using scattered light, transmitted light or ioniz | 01/01/2021 |
| Regulation (EU) No 305/2011 | EN 54-10:2002EN 54-10:2002/A1:2005 | Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors | |
| Regulation (EU) No 305/2011 | EN 54-11:2001EN 54-11:2001/A1:2005 | Fire detection and fire alarm systems — Part 11: Manual call points | |
| Regulation (EU) No 305/2011 | EN 54-12:2015 | Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical beam | |
| Regulation (EU) No 305/2011 | EN 54-16:2008 | Fire detection and fire alarm systems — Part 16: Voice alarm control and indicating equipment | |
| Regulation (EU) No 305/2011 | EN 54-17:2005EN 54-17:2005/AC:2007 | Fire detection and fire alarm systems — Part 17: Short-circuit isolators | |
| Regulation (EU) No 305/2011 | EN 54-18:2005EN 54-18:2005/AC:2007 | Fire detection and fire alarm systems — Part 18: Input/output devices | |
| Regulation (EU) No 305/2011 | EN 54-20:2006EN 54-20:2006/AC:2008 | Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors | |
| Regulation (EU) No 305/2011 | EN 54-21:2006 | Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment | |
| Regulation (EU) No 305/2011 | EN 54-23:2010 | Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices | |
| Regulation (EU) No 305/2011 | EN 54-24:2008 | Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers | |
| Regulation (EU) No 305/2011 | EN 54-25:2008EN 54-25:2008/AC:2012 | Fire detection and fire alarm systems — Part 25: Components using radio links | |
| Regulation (EU) No 305/2011 | EN 179:2008 | Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on escape routes — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 197-1:2011 | Cement — Part 1: Composition, specifications and conformity criteria for common cements | |
| Regulation (EU) No 305/2011 | EN 295-1:2013 | Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints | |
| Regulation (EU) No 305/2011 | EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers — Part 4: Requirements for adaptors, connectors and flexible couplings | |
| Regulation (EU) No 305/2011 | EN 295-5:2013 | Vitrified clay pipe systems for drains and sewers — Part 5: Requirements for perforated pipes and fittings | |
| Regulation (EU) No 305/2011 | EN 295-6:2013 | Vitrified clay pipes systems for drain and sewers — Part 6: Requirements for components of manholes andinspection chambers | |
| Regulation (EU) No 305/2011 | EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers — Part 7: Requirements for pipes and joints for pipe jacking | |
| Regulation (EU) No 305/2011 | EN 331:1998EN 331:1998/A1:2010 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings | |
| Regulation (EU) No 305/2011 | EN 413-1:2011 | Masonry cement — Part 1: Composition, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety | |
| Regulation (EU) No 305/2011 | EN 438-7:2005 | High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composit | |
| Regulation (EU) No 305/2011 | EN 442-1:2014 | Radiators and convectors — Part 1: Technical specifications and requirements | |
| Regulation (EU) No 305/2011 | EN 450-1:2012 | Fly ash for concrete — Part 1:Definition, specifications andconformity criteria | |
| Regulation (EU) No 305/2011 | EN 459-1:2010 | Building lime — Part 1: Definitions, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 490:2011 | Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications | |
| Regulation (EU) No 305/2011 | EN 492:2012+A2:2018 | Fibre-cement slates and fittings — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 494:2012+A1:2015 | Fibre-cement profiled sheets and fittings — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 516:2006 | Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps | |
| Regulation (EU) No 305/2011 | EN 517:2006 | Prefabricated accessories for roofing — Roof safety hooks | |
| Regulation (EU) No 305/2011 | EN 520:2004+A1:2009 | Gypsum plasterboards — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 523:2003 | Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control | |
| Regulation (EU) No 305/2011 | EN 534:2006+A1:2010 | Corrugated bitumen sheets — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 544:2011 | Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 572-9:2004 | Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/ Product standard | |
| Regulation (EU) No 305/2011 | EN 588-2:2001 | Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers | |
| Regulation (EU) No 305/2011 | EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportatio | |
| Regulation (EU) No 305/2011 | EN 671-1:2012 | Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose | |
| Regulation (EU) No 305/2011 | EN 671-2:2012 | Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose | |
| Regulation (EU) No 305/2011 | EN 681-1:1996EN 681-1:1996/A2:2002EN 681-1:1996/A3:2005EN 681-1:1996/A1:1998 | Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber | |
| Regulation (EU) No 305/2011 | EN 681-2:2000EN 681-2:2000/A1:2002EN 681-2:2000/A2:2005 | Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomer | |
| Regulation (EU) No 305/2011 | EN 681-3:2000EN 681-3:2000/A1:2002EN 681-3:2000/A2:2005 | Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rub | |
| Regulation (EU) No 305/2011 | EN 681-4:2000EN 681-4:2000/A1:2002EN 681-4:2000/A2:2005 | Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements | |
| Regulation (EU) No 305/2011 | EN 682:2002EN 682:2002/A1:2005 | Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids | |
| Regulation (EU) No 305/2011 | EN 771-1:2011+A1:2015 | Specification for masonry units — Part 1: Clay masonry units | |
| Regulation (EU) No 305/2011 | EN 771-2:2011+A1:2015 | Specification for masonry units — Part 2: Calcium silicate masonry units | |
| Regulation (EU) No 305/2011 | EN 771-3:2011+A1:2015 | Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) | |
| Regulation (EU) No 305/2011 | EN 771-4:2011+A1:2015 | Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units | |
| Regulation (EU) No 305/2011 | EN 771-5:2011+A1:2015 | Specification for masonry units — Part 5: Manufactured stone masonry units | |
| Regulation (EU) No 305/2011 | EN 771-6:2011+A1:2015 | Specification for masonry units — Part 6: Natural stone masonry units | |
| Regulation (EU) No 305/2011 | EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D — Safety | |
| Regulation (EU) No 305/2011 | EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E — Safety | |
| Regulation (EU) No 305/2011 | EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use — Part 3: System F — Safety | |
| Regulation (EU) No 305/2011 | EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H — Safety | |
| Regulation (EU) No 305/2011 | EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of | |
| Regulation (EU) No 305/2011 | EN 845-1:2013+A1:2016 | Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets | |
| Regulation (EU) No 305/2011 | EN 845-2:2013+A1:2016 | Specification for ancillary components for masonry — Part 2: Lintels | |
| Regulation (EU) No 305/2011 | EN 845-3:2013+A1:2016 | Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork | |
| Regulation (EU) No 305/2011 | EN 858-1:2002EN 858-1:2002/A1:2004 | Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control | |
| Regulation (EU) No 305/2011 | EN 877:1999EN 877:1999/A1:2006EN 877:1999/A1:2006/AC:2008 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assuran | |
| Regulation (EU) No 305/2011 | EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling | |
| Regulation (EU) No 305/2011 | EN 934-3:2009+A1:2012 | Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity and marking and labelling | |
| Regulation (EU) No 305/2011 | EN 934-4:2009 | Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and | |
| Regulation (EU) No 305/2011 | EN 934-5:2007 | Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete — Definitions, requirements, conformity, marking and labelling | |
| Regulation (EU) No 305/2011 | EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 997:2012EN 997:2012/AC:2012 | WC pans and WC suites with integraltrap | |
| Regulation (EU) No 305/2011 | EN 998-1:2016 | Specification for mortar for masonry — Part 1: Rendering and plastering mortar | |
| Regulation (EU) No 305/2011 | EN 998-2:2016 | Specification for mortar for masonry — Part 2: Masonry mortar | |
| Regulation (EU) No 305/2011 | EN 1013:2012+A1:2014 | Light transmitting single skin profiled plastics sheets for internal andexternal roofs, walls and ceilings —Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating notexceeding a net heat input of 300 kW incorporating a fan to assist transport | |
| Regulation (EU) No 305/2011 | EN 1036-2:2008 | Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard | |
| Regulation (EU) No 305/2011 | EN 1051-2:2007 | Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard | |
| Regulation (EU) No 305/2011 | EN 1057:2006+A1:2010 | Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heatingapplications | |
| Regulation (EU) No 305/2011 | EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components | |
| Regulation (EU) No 305/2011 | EN 1096-4:2018 | Glass in building — Coated glass — Part 4: Evaluation ofconformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 1123-1:1999EN 1123-1:1999/A1:2004 | Pipes and fittings of longitudinally welded hot- dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements | |
| Regulation (EU) No 305/2011 | EN 1124-1:1999EN 1124-1:1999/A1:2004 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste watersystems — Part 1: Requirements, testing, quali | |
| Regulation (EU) No 305/2011 | EN 1125:2008 | Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1154:1996EN 1154:1996/A1:2002EN 1154:1996/A1:2002/AC:2006 | Building hardware — Controlled door closing devices — Requirements andtest method | |
| Regulation (EU) No 305/2011 | EN 1155:1997EN 1155:1997/A1:2002EN 1155:1997/A1:2002/AC:2006 | Building hardware — Electrically powered hold- open devices for swing doors — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1158:1997EN 1158:1997/A1:2002/AC:2006EN 1158:1997/A1:2002 | Building hardware — Door coordinator devices — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1168:2005+A3:2011 | Precast concrete products — Hollow core slabs | |
| Regulation (EU) No 305/2011 | EN 1279-5:2018 | Glass in building — Insulating glass units — Part 5: Product standard | |
| Regulation (EU) No 305/2011 | EN 1304:2005 | Clay roofing tiles and fittings — Product definitions and specifications | |
| Regulation (EU) No 305/2011 | EN 1317-5:2007+A2:2012EN 1317-5:2007+A2:2012/AC:2012 | Road restraint systems — Part 5:Product requirements and evaluation of conformity for vehicle restraintsystem | |
| Regulation (EU) No 305/2011 | EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW | |
| Regulation (EU) No 305/2011 | EN 1337-3:2005 | Structural bearings — Part 3: Elastomeric bearings | |
| Regulation (EU) No 305/2011 | EN 1337-4:2004EN 1337-4:2004/AC:2007 | Structural bearings — Part 4: Roller bearings | |
| Regulation (EU) No 305/2011 | EN 1337-5:2005 | Structural bearings — Part 5: Pot bearings | |
| Regulation (EU) No 305/2011 | EN 1337-6:2004 | Structural bearings — Part 6: Rocker bearings | |
| Regulation (EU) No 305/2011 | EN 1337-7:2004 | Structural bearings — Part 7: Spherical and cylindrical PTFE bearings | |
| Regulation (EU) No 305/2011 | EN 1337-8:2007 | Structural bearings — Part 8: Guide Bearings and Restraint Bearings | |
| Regulation (EU) No 305/2011 | EN 1338:2003EN 1338:2003/AC:2006 | Concrete paving blocks — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1339:2003EN 1339:2003/AC:2006 | Concrete paving flags — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1340:2003EN 1340:2003/AC:2006 | Concrete kerb units — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1341:2012 | Slabs of natural stone for external paving — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1342:2012 | Setts of natural stone for external paving — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1343:2012 | Kerbs of natural stone for external paving — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1344:2013EN 1344:2013/AC:2015 | Clay pavers — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1423:2012EN 1423:2012/AC:2013 | Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two | |
| Regulation (EU) No 305/2011 | EN 1433:2002EN 1433:2002/A1:2005 | Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity | |
| Regulation (EU) No 305/2011 | EN 1457-1:2012 | Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1457-2:2012 | Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1463-1:2021 | Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements | 26/09/2025 |
| Regulation (EU) No 305/2011 | EN 1469:2015 | Natural stone products — Slabs for cladding — Requirements | |
| Regulation (EU) No 305/2011 | EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — | |
| Regulation (EU) No 305/2011 | EN 1504-3:2005 | Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — | |
| Regulation (EU) No 305/2011 | EN 1504-4:2004 | Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — | |
| Regulation (EU) No 305/2011 | EN 1504-5:2004 | Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — | |
| Regulation (EU) No 305/2011 | EN 1504-6:2006 | Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — | |
| Regulation (EU) No 305/2011 | EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — | |
| Regulation (EU) No 305/2011 | EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement | |
| Regulation (EU) No 305/2011 | EN 1748-1-2:2004 | Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 1748-2-2:2004 | Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 1806:2006 | Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 1825-1:2004EN 1825-1:2004/AC:2006 | Grease separators — Part 1: Principles of design, performance and testing, marking and quality control | |
| Regulation (EU) No 305/2011 | EN 1856-1:2009 | Chimneys — Requirements for metal chimneys — Part 1: System chimney products | |
| Regulation (EU) No 305/2011 | EN 1856-2:2009 | Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes | |
| Regulation (EU) No 305/2011 | EN 1857:2010 | Chimneys — Components — Concrete flue liners | |
| Regulation (EU) No 305/2011 | EN 1858:2008+A1:2011 | Chimneys — Components — Concrete flue blocks | |
| Regulation (EU) No 305/2011 | EN 1863-2:2004 | Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/ Product standard | |
| Regulation (EU) No 305/2011 | EN 1873:2005 | Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 1916:2002EN 1916:2002/AC:2008 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced | |
| Regulation (EU) No 305/2011 | EN 1917:2002EN 1917:2002/AC:2008 | Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced | |
| Regulation (EU) No 305/2011 | EN 1935:2002EN 1935:2002/AC:2003 | Building hardware — Single-axis hinges — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 10025-1:2004 | Hot rolled products of structural steels — Part 1: General technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 10088-4:2009 | Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes | |
| Regulation (EU) No 305/2011 | EN 10088-5:2009 | Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construc | |
| Regulation (EU) No 305/2011 | EN 10210-1:2006 | Hot finished structural hollow sections of non- alloy and fine grain steels — Part 1: Technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 10219-1:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 10224:2002EN 10224:2002/A1:2005 | Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids | |
| Regulation (EU) No 305/2011 | EN 10312:2002EN 10312:2002/A1:2005 | Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 10340:2007EN 10340:2007/AC:2008 | Steel castings for structural uses | |
| Regulation (EU) No 305/2011 | EN 10343:2009 | Steels for quenching and tempering for construction purposes — Technical delivery conditions | |
| Regulation (EU) No 305/2011 | EN 12004:2007+A1:2012 | Adhesives for tiles — Requirements, evaluation of conformity, classification and designation | |
| Regulation (EU) No 305/2011 | EN 12050-1:2001 | Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal m | |
| Regulation (EU) No 305/2011 | EN 12050-2:2000 | Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater | |
| Regulation (EU) No 305/2011 | EN 12050-3:2000 | Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal m | |
| Regulation (EU) No 305/2011 | EN 12050-4:2000 | Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and | |
| Regulation (EU) No 305/2011 | EN 12057:2004 | Natural stone products — Modular tiles — Requirements | |
| Regulation (EU) No 305/2011 | EN 12058:2004 | Natural stone products — Slabs for floors and stairs — Requirements | |
| Regulation (EU) No 305/2011 | EN 12094-1:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and del | |
| Regulation (EU) No 305/2011 | EN 12094-2:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and | |
| Regulation (EU) No 305/2011 | EN 12094-3:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices | |
| Regulation (EU) No 305/2011 | EN 12094-4:2004 | Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their | |
| Regulation (EU) No 305/2011 | EN 12094-5:2006 | Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valve | |
| Regulation (EU) No 305/2011 | EN 12094-6:2006 | Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices | |
| Regulation (EU) No 305/2011 | EN 12094-7:2000EN 12094-7:2000/A1:2005 | Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems | |
| Regulation (EU) No 305/2011 | EN 12094-8:2006 | Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors | |
| Regulation (EU) No 305/2011 | EN 12094-9:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors | |
| Regulation (EU) No 305/2011 | EN 12094-10:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switch | |
| Regulation (EU) No 305/2011 | EN 12094-11:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices | |
| Regulation (EU) No 305/2011 | EN 12094-12:2003 | Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices | |
| Regulation (EU) No 305/2011 | EN 12094-13:2001EN 12094-13:2001/AC:2002 | Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves | |
| Regulation (EU) No 305/2011 | EN 12101-1:2005EN 12101-1:2005/A1:2006 | Smoke and heat control systems — Part 1: Specification for smoke barriers | |
| Regulation (EU) No 305/2011 | EN 12101-2:2003 | Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators | |
| Regulation (EU) No 305/2011 | EN 12101-3:2015 | Smoke and heat control systems — Part 3: Specification for powered smoke and heat control ventilators (Fans) | |
| Regulation (EU) No 305/2011 | EN 12101-6:2005EN 12101-6:2005/AC:2006 | Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits | |
| Regulation (EU) No 305/2011 | EN 12101-7:2011 | Smoke and heat control systems — Part 7: Smoke duct sections | |
| Regulation (EU) No 305/2011 | EN 12101-8:2011 | Smoke and heat control systems — Part 8: Smoke control dampers | |
| Regulation (EU) No 305/2011 | EN 12101-10:2005EN 12101-10:2005/AC:2007 | Smoke and heat control systems — Part 10: Power supplies | |
| Regulation (EU) No 305/2011 | EN 12150-2:2004 | Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 12209:2003EN 12209:2003/AC:2005 | Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 12259-1:1999 + A1:2001EN 12259-1:1999 + A1:2001/A2:2004EN 12259-1:1999 + A1:2001/A3:2006 | Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers | |
| Regulation (EU) No 305/2011 | EN 12259-2:1999EN 12259-2:1999/A1:2001EN 12259-2:1999/AC:2002EN 12259-2:1999/A2:2005 | Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies | |
| Regulation (EU) No 305/2011 | EN 12259-3:2000EN 12259-3:2000/A1:2001EN 12259-3:2000/A2:2005 | Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies | |
| Regulation (EU) No 305/2011 | EN 12259-4:2000EN 12259-4:2000/A1:2001 | Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms | |
| Regulation (EU) No 305/2011 | EN 12259-5:2002 | Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors | |
| Regulation (EU) No 305/2011 | EN 12271:2006 | Surface dressing — Requirements | |
| Regulation (EU) No 305/2011 | EN 12273:2008 | Slurry surfacing — Requirements | |
| Regulation (EU) No 305/2011 | EN 12285-2:2005 | Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-fl | |
| Regulation (EU) No 305/2011 | EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate | |
| Regulation (EU) No 305/2011 | EN 12337-2:2004 | Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 12352:2006 | Traffic control equipment — Warning and safety light devices | |
| Regulation (EU) No 305/2011 | EN 12368:2006 | Traffic control equipment — Signal heads | |
| Regulation (EU) No 305/2011 | EN 12380:2002 | Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity | |
| Regulation (EU) No 305/2011 | EN 12446:2011 | Chimneys — Components — Concrete outer wall elements | |
| Regulation (EU) No 305/2011 | EN 12467:2012+A2:2018 | Fibre-cement flat sheets — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 12566-1:2000EN 12566-1:2000/A1:2003 | Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks | |
| Regulation (EU) No 305/2011 | EN 12566-3:2005+A2:2013 | Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants | |
| Regulation (EU) No 305/2011 | EN 12566-4:2007 | Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits | |
| Regulation (EU) No 305/2011 | EN 12566-6:2013 | Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent | |
| Regulation (EU) No 305/2011 | EN 12566-7:2013 | Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units | |
| Regulation (EU) No 305/2011 | EN 12591:2009 | Bitumen and bituminous binders — Specifications for paving grade bitumens | |
| Regulation (EU) No 305/2011 | EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete | |
| Regulation (EU) No 305/2011 | EN 12620:2002+A1:2008 | Aggregates for concrete | |
| Regulation (EU) No 305/2011 | EN 12676-1:2000EN 12676-1:2000/A1:2003 | Anti-glare systems for roads — Part 1: Performance and characteristics | |
| Regulation (EU) No 305/2011 | EN 12737:2004+A1:2007 | Precast concrete products — Floor slats for livestock | |
| Regulation (EU) No 305/2011 | EN 12764:2004+A1:2008 | Sanitary appliances — Specification for whirlpool baths | |
| Regulation (EU) No 305/2011 | EN 12794:2005+A1:2007EN 12794:2005+A1:2007/AC:2008 | Precast concrete products — Foundation piles | |
| Regulation (EU) No 305/2011 | EN 12839:2012 | Precast concrete products — Elements for fences | |
| Regulation (EU) No 305/2011 | EN 12843:2004 | Precast concrete products — Masts and poles | |
| Regulation (EU) No 305/2011 | EN 12859:2011 | Gypsum blocks — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 12860:2001EN 12860:2001/AC:2002 | Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 12878:2005EN 12878:2005/AC:2006 | Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test | |
| Regulation (EU) No 305/2011 | EN 12899-1:2007 | Fixed, vertical road traffic signs — Part 1: Fixed signs | |
| Regulation (EU) No 305/2011 | EN 12899-2:2007 | Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB) | |
| Regulation (EU) No 305/2011 | EN 12899-3:2007 | Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors | |
| Regulation (EU) No 305/2011 | EN 12951:2004 | Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods | |
| Regulation (EU) No 305/2011 | EN 12966-1:2005+A1:2009 | Road vertical signs — Variable message traffic signs — Part 1: Product standard | |
| Regulation (EU) No 305/2011 | EN 13024-2:2004 | Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 13043:2002EN 13043:2002/AC:2004 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas | |
| Regulation (EU) No 305/2011 | EN 130551:2002EN 13055-1:2002/AC:2004 | Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout | |
| Regulation (EU) No 305/2011 | EN 13055-2:2004 | Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications | |
| Regulation (EU) No 305/2011 | EN 13063-1:2005+A1:2007 | Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance | |
| Regulation (EU) No 305/2011 | EN 13063-2:2005+A1:2007 | Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions | |
| Regulation (EU) No 305/2011 | EN 13063-3:2007 | Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys | |
| Regulation (EU) No 305/2011 | EN 13069:2005 | Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13084-5:2005EN 13084-5:2005/AC:2006 | Free-standing chimneys — Part 5: Material for brick liners — Product specifications | |
| Regulation (EU) No 305/2011 | EN 13084-7:2012 | Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners | |
| Regulation (EU) No 305/2011 | EN 13101:2002 | Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity | |
| Regulation (EU) No 305/2011 | EN 13108-1:2006EN 13108-1:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete | |
| Regulation (EU) No 305/2011 | EN 13108-2:2006EN 13108-2:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers | |
| Regulation (EU) No 305/2011 | EN 13108-3:2006EN 13108-3:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 3: Soft Asphalt | |
| Regulation (EU) No 305/2011 | EN 13108-4:2006EN 13108-4:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt | |
| Regulation (EU) No 305/2011 | EN 13108-5:2006EN 13108-5:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt | |
| Regulation (EU) No 305/2011 | EN 13108-6:2006EN 13108-6:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt | |
| Regulation (EU) No 305/2011 | EN 13108-7:2006EN 13108-7:2006/AC:2008 | Bituminous mixtures — Material specifications — Part 7: Porous Asphalt | |
| Regulation (EU) No 305/2011 | EN 13139:2002EN 13139:2002/AC:2004 | Aggregates for mortar | |
| Regulation (EU) No 305/2011 | EN 13160-1:2003 | Leak detection systems — Part 1: General principles | |
| Regulation (EU) No 305/2011 | EN 13162:2012+A1:2015 | Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13163:2012+A1:2015 | Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13164:2012+A1:2015 | Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13165:2012+A2:2016 | Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13166:2012+A2:2016 | Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13167:2012+A1:2015 | Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13168:2012+A1:2015 | Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13169:2012+A1:2015 | Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13170:2012+A1:2015 | Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification | |
| Regulation (EU) No 305/2011 | EN 13171:2012+A1:2015 | Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification | |
| Regulation (EU) No 305/2011 | EN 13224:2011 | Precast concrete products — Ribbed floor elements | |
| Regulation (EU) No 305/2011 | EN 13225:2013 | Precast concrete products — Linear structural elements | |
| Regulation (EU) No 305/2011 | EN 13241:2003+A2:2016 | Industrial, commercial, garage doors and gates — Product standard, performance characteristics | |
| Regulation (EU) No 305/2011 | EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction | |
| Regulation (EU) No 305/2011 | EN 13245-2:2008EN 13245-2:2008/AC:2009 | Plastics — Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and | |
| Regulation (EU) No 305/2011 | EN 13249:2016 | Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding rail | |
| Regulation (EU) No 305/2011 | EN 13250:2016 | Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways | |
| Regulation (EU) No 305/2011 | EN 13251:2016 | Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures | |
| Regulation (EU) No 305/2011 | EN 13252:2016 | Geotextiles and geotextile-related products — Characteristics required for use in drainage systems | |
| Regulation (EU) No 305/2011 | EN 13253:2016 | Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments | |
| Regulation (EU) No 305/2011 | EN 13254:2016 | Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams | |
| Regulation (EU) No 305/2011 | EN 13255:2016 | Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals | |
| Regulation (EU) No 305/2011 | EN 13256:2016 | Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures | |
| Regulation (EU) No 305/2011 | EN 13257:2016 | Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals | |
| Regulation (EU) No 305/2011 | EN 13263-1:2005+A1:2009 | Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 13265:2016 | Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects | |
| Regulation (EU) No 305/2011 | EN 13279-1:2008 | Gypsum binders and gypsum plasters — Part 1: Definitions and requirements | |
| Regulation (EU) No 305/2011 | EN 13282-1:2013 | Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 13310:2003 | Kitchen sinks — Functional requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded and rotationally moulded polyet | |
| Regulation (EU) No 305/2011 | EN 13361:2004EN 13361:2004/A1:2006 | Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams | |
| Regulation (EU) No 305/2011 | EN 13362:2005 | Geosynthetic Barriers — Characteristics required for use in the construction of canals | |
| Regulation (EU) No 305/2011 | EN 13383-1:2002EN 13383-1:2002/AC:2004 | Armourstone — Part 1: Specification | |
| Regulation (EU) No 305/2011 | EN 13407:2006 | Wall-hung urinals — Functional requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13450:2002EN 13450:2002/AC:2004 | Aggregates for railway ballast | |
| Regulation (EU) No 305/2011 | EN 13454-1:2004 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements | |
| Regulation (EU) No 305/2011 | EN 13479:2017 | Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials | |
| Regulation (EU) No 305/2011 | EN 13491:2004EN 13491:2004/A1:2006 | Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures | |
| Regulation (EU) No 305/2011 | EN 13492:2004EN 13492:2004/A1:2006 | Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containmen | |
| Regulation (EU) No 305/2011 | EN 13493:2005 | Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites | |
| Regulation (EU) No 305/2011 | EN 13502:2002 | Chimneys — Requirements and test methods for clay/ceramic flue terminals | |
| Regulation (EU) No 305/2011 | EN 13561:2004+A1:2008 | External blinds — Performance requirements including safety | |
| Regulation (EU) No 305/2011 | EN 13564-1:2002 | Anti-flooding devices for buildings — Part 1: Requirements | |
| Regulation (EU) No 305/2011 | EN 13616:2004EN 13616:2004/AC:2006 | Overfill prevention devices for static tanks for liquid petroleum fuels | |
| Regulation (EU) No 305/2011 | EN 13658-1:2005 | Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering | |
| Regulation (EU) No 305/2011 | BS EN 13658-2:2005 | Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering | |
| Regulation (EU) No 305/2011 | EN 13659:2004+A1:2008 | Shutters — Performance requirements including safety | |
| Regulation (EU) No 305/2011 | EN 13693:2004+A1:2009 | Precast concrete products — Special roof elements | |
| Regulation (EU) No 305/2011 | EN 13707:2004+A2:2009 | Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 13747:2005+A2:2010 | Precast concrete products — Floor plates for floor systems | |
| Regulation (EU) No 305/2011 | EN 13748-1:2004EN 13748-1:2004/A1:2005EN 13748-1:2004/AC:2005 | Terrazzo tiles — Part 1: Terrazzo tiles for internal use | |
| Regulation (EU) No 305/2011 | EN 13748-2:2004 | Terrazzo tiles — Part 2: Terrazzo tiles for external use | |
| Regulation (EU) No 305/2011 | EN 13808:2013 | Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions | |
| Regulation (EU) No 305/2011 | EN 13813:2002 | Screed material and floor screeds — Screed material — Properties and requirements | |
| Regulation (EU) No 305/2011 | EN 13815:2006 | Fibrous gypsum plaster casts — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13830:2003 | Curtain walling — Product standard | |
| Regulation (EU) No 305/2011 | EN 13859-1:2010 | Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing | |
| Regulation (EU) No 305/2011 | EN 13859-2:2010 | Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls | |
| Regulation (EU) No 305/2011 | EN 13877-3:2004 | Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements | |
| Regulation (EU) No 305/2011 | EN 13915:2007 | Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13924:2006EN 13924:2006/AC:2006 | Bitumen and bituminous binders — Specifications for hard paving grade bitumens | |
| Regulation (EU) No 305/2011 | EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13956:2012 | Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 13963:2005EN 13963:2005/AC:2006 | Jointing materials for gypsum plasterboards — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13964:2014 | Suspended ceilings — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 13967:2012 | Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and charact | |
| Regulation (EU) No 305/2011 | EN 13969:2004EN 13969:2004/A1:2006 | Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 13970:2004EN 13970:2004/A1:2006 | Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 13978-1:2005 | Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with ro | |
| Regulation (EU) No 305/2011 | EN 13984:2013 | Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 13986:2004+A1:2015 | Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking | |
| Regulation (EU) No 305/2011 | EN 14016-1:2004 | Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements | |
| Regulation (EU) No 305/2011 | EN 14023:2010 | Bitumen and bituminous binders — Specification framework for polymer modified bitumens | |
| Regulation (EU) No 305/2011 | EN 14037-1:2016 | Free hanging heating and cooling surfaces for water with a temperature below 120 oC — Part 1: Pre-fabricated ceiling mounted radiant panels for space | |
| Regulation (EU) No 305/2011 | EN 14041:2004EN 14041:2004/AC:2006 | Resilient, textile and laminate floor coverings — Essential characteristics | |
| Regulation (EU) No 305/2011 | EN 14055:2010 | WC and urinal flushing cisterns | |
| Regulation (EU) No 305/2011 | EN 14063-1:2004EN 14063-1:2004/AC:2006 | Thermal insulation products for buildings — In- situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill pr | |
| Regulation (EU) No 305/2011 | EN 14064-1:2010 | Thermal insulation products for buildings — In- situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products | |
| Regulation (EU) No 305/2011 | EN 14080:2013 | Timber structures — Glued laminated timber and glued solid timber — Requirements | |
| Regulation (EU) No 305/2011 | EN 14081-1:2005+A1:2011 | Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements | |
| Regulation (EU) No 305/2011 | EN 14178-2:2004 | Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 14179-2:2005 | Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 14188-1:2004 | Joint fillers and sealants — Part 1: Specifications for hot applied sealants | |
| Regulation (EU) No 305/2011 | EN 14188-2:2004 | Joint fillers and sealants — Part 2: Specifications for cold applied sealants | |
| Regulation (EU) No 305/2011 | EN 14188-3:2006 | Joint fillers and sealants — Part 3: Specifications for preformed joint seals | |
| Regulation (EU) No 305/2011 | EN 14190:2014 | Gypsum board products from reprocessing — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14195:2005EN 14195:2005/AC:2006 | Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14209:2017 | Preformed plasterboard cornices — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14216:2015 | Cement — Composition, specifications and conformity criteria for very low heat special cements | |
| Regulation (EU) No 305/2011 | EN 14229:2010 | Structural timber — Wood poles for overhead lines | |
| Regulation (EU) No 305/2011 | EN 14246:2006EN 14246:2006/AC:2007 | Gypsum elements for suspended ceilings — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14250:2010 | Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners | |
| Regulation (EU) No 305/2011 | EN 14296:2005 | Sanitary appliances — Communal washing troughs | |
| Regulation (EU) No 305/2011 | EN 14303:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification | |
| Regulation (EU) No 305/2011 | EN 14304:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specificatio | |
| Regulation (EU) No 305/2011 | EN 14305:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification | |
| Regulation (EU) No 305/2011 | EN 14306:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification | |
| Regulation (EU) No 305/2011 | EN 14307:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specificatio | |
| Regulation (EU) No 305/2011 | EN 14308:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam | |
| Regulation (EU) No 305/2011 | EN 14309:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made products of expanded polystyrene (EPS) — Specification | |
| Regulation (EU) No 305/2011 | EN 14313:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification | |
| Regulation (EU) No 305/2011 | EN 14314:2009+A1:2013 | Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification | |
| Regulation (EU) No 305/2011 | EN 14315-1:2013 | Thermal insulating products for buildings — In- situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specif | |
| Regulation (EU) No 305/2011 | EN 14316-1:2004 | Thermal insulation products for buildings — In- situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded | |
| Regulation (EU) No 305/2011 | EN 14317-1:2004 | Thermal insulation products for buildings — In- situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for b | |
| Regulation (EU) No 305/2011 | EN 14318-1:2013 | Thermal insulating products for buildings — In- situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Spec | |
| Regulation (EU) No 305/2011 | EN 14319-1:2013 | Thermal insulating products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanura | |
| Regulation (EU) No 305/2011 | EN 14320-1:2013 | Thermal insulating products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate | |
| Regulation (EU) No 305/2011 | EN 14321-2:2005 | Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 14339:2005 | Underground fire hydrants | |
| Regulation (EU) No 305/2011 | EN 14342:2013 | Wood flooring and parquet — Characteristics, evaluation of conformity and marking | |
| Regulation (EU) No 305/2011 | EN 14351-1:2006+A2:2016 | Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets | |
| Regulation (EU) No 305/2011 | EN 14353:2007+A1:2010 | Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14374:2004 | Timber structures — Structural laminated veneer lumber — Requirements | |
| Regulation (EU) No 305/2011 | EN 14384:2005 | Pillar fire hydrants | |
| Regulation (EU) No 305/2011 | EN 14388:2005EN 14388:2005/AC:2008 | Road traffic noise reducing devices — Specifications | |
| Regulation (EU) No 305/2011 | EN 14396:2004 | Fixed ladders for manholes | |
| Regulation (EU) No 305/2011 | EN 14399-1:2015 | High-strength structural bolting assemblies for preloading — Part 1: General requirements | |
| Regulation (EU) No 305/2011 | EN 14411:2012 | Ceramic tiles — Definitions, classification, characteristics, evaluation of conformity and marking | |
| Regulation (EU) No 305/2011 | EN 14428:2004+A1:2008 | Shower enclosures — Functional requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14449:2005EN 14449:2005/AC:2005 | Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 14471:2013+A1:2015 | Chimneys — System chimneys with plastic flue liners — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14496:2005 | Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14509:2013 | Self-supporting double skin metal faced insulating panels — Factory made products — Specifications | |
| Regulation (EU) No 305/2011 | EN 14516:2006+A1:2010 | Baths for domestic purposes | |
| Regulation (EU) No 305/2011 | EN 14527:2006+A1:2010 | Shower trays for domestic purposes | |
| Regulation (EU) No 305/2011 | EN 14528:2007 | Bidets — Functional requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14545:2008 | Timber structures — Connectors — Requirements | |
| Regulation (EU) No 305/2011 | EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems — Definitions, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14592:2008+A1:2012 | Timber structures — Dowel-type fasteners — Requirements | |
| Regulation (EU) No 305/2011 | EN 14604:2005EN 14604:2005/AC:2008 | Smoke alarm devices | |
| Regulation (EU) No 305/2011 | EN 14647:2005EN 14647:2005/AC:2006 | Calcium aluminate cement — Composition, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 14680:2006 | Adhesives for non-pressure thermoplastic piping systems — Specifications | |
| Regulation (EU) No 305/2011 | EN 14688:2006 | Sanitary appliances — Wash basins — Functional requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14695:2010 | Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Defi | |
| Regulation (EU) No 305/2011 | EN 14716:2004 | Stretched ceilings — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements | |
| Regulation (EU) No 305/2011 | EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements | |
| Regulation (EU) No 305/2011 | EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels | |
| Regulation (EU) No 305/2011 | EN 14814:2007 | Adhesives for thermoplastic piping systems for fluids under pressure — Specifications | |
| Regulation (EU) No 305/2011 | EN 14843:2007 | Precast concrete products — Stairs | |
| Regulation (EU) No 305/2011 | EN 14844:2006+A2:2011 | Precast concrete products — Box culverts | |
| Regulation (EU) No 305/2011 | EN 14846:2008 | Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14889-1:2006 | Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity | |
| Regulation (EU) No 305/2011 | EN 14889-2:2006 | Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity | |
| Regulation (EU) No 305/2011 | EN 14891:2012EN 14891:2012/AC:2012 | Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, | |
| Regulation (EU) No 305/2011 | EN 14904:2006 | Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification | |
| Regulation (EU) No 305/2011 | EN 14909:2012 | Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 14915:2013 | Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking | |
| Regulation (EU) No 305/2011 | EN 14933:2007 | Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specifica | |
| Regulation (EU) No 305/2011 | EN 14934:2007 | Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Spec | |
| Regulation (EU) No 305/2011 | EN 14963:2006 | Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 14964:2006 | Rigid underlays for discontinuous roofing — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 14967:2006 | Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics | |
| Regulation (EU) No 305/2011 | EN 14989-1:2007 | Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Ve | |
| Regulation (EU) No 305/2011 | EN 14989-2:2007 | Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 2: Fl | |
| Regulation (EU) No 305/2011 | EN 14991:2007 | Precast concrete products — Foundation elements | |
| Regulation (EU) No 305/2011 | EN 14992:2007+A1:2012 | Precast concrete products — Wall elements | |
| Regulation (EU) No 305/2011 | EN 15037-1:2008 | Precast concrete products — Beam-and-block floor systems — Part 1: Beams | |
| Regulation (EU) No 305/2011 | EN 15037-2:2009+A1:2011 | Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks | |
| Regulation (EU) No 305/2011 | EN 15037-3:2009+A1:2011 | Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks | |
| Regulation (EU) No 305/2011 | EN 15037-4:2010+A1:2013 | Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks | |
| Regulation (EU) No 305/2011 | EN 15037-5:2013 | Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork | |
| Regulation (EU) No 305/2011 | EN 15048-1:2007 | Non-preloaded structural bolting assemblies — Part 1: General requirements | |
| Regulation (EU) No 305/2011 | EN 15050:2007+A1:2012 | Precast concrete products — Bridge elements | |
| Regulation (EU) No 305/2011 | EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel | |
| Regulation (EU) No 305/2011 | EN 15088:2005 | Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery | |
| Regulation (EU) No 305/2011 | EN 15102:2007+A1:2011 | Decorative wall coverings — Roll and panel form | |
| Regulation (EU) No 305/2011 | EN 15129:2009 | Anti-seismic devices | |
| Regulation (EU) No 305/2011 | EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 15250:2007 | Slow heat release appliances fired by solid fuel — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 15258:2008 | Precast concrete products — Retaining wall elements | |
| Regulation (EU) No 305/2011 | EN 15274:2015 | General purpose adhesives for structural assembly — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 15275:2015 | Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures | |
| Regulation (EU) No 305/2011 | EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement | |
| Regulation (EU) No 305/2011 | EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards | |
| Regulation (EU) No 305/2011 | EN 15285:2008EN 15285:2008/AC:2008 | Agglomerated stone — Modular tiles for flooring and stairs (internal and external) | |
| Regulation (EU) No 305/2011 | EN 15286:2013 | Agglomerated stone — Slabs and tiles for wall finishes (internal and external) | |
| Regulation (EU) No 305/2011 | EN 15322:2013 | Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders | |
| Regulation (EU) No 305/2011 | EN 15368:2008+A1:2010 | Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 15381:2008 | Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays | |
| Regulation (EU) No 305/2011 | EN 15382:2013 | Geosynthetic barriers — Characteristics required for use in transportation infrastructure | |
| Regulation (EU) No 305/2011 | EN 15435:2008 | Precast concrete products — Normal weight and lightweight concrete shuttering blocks — Product properties and performance | |
| Regulation (EU) No 305/2011 | EN 15497:2014 | Structural finger jointed solid timber — Performance requirements and minimum production requirements | |
| Regulation (EU) No 305/2011 | EN 15498:2008 | Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance | |
| Regulation (EU) No 305/2011 | EN 15501:2013 | Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) p | |
| Regulation (EU) No 305/2011 | EN 15599-1:2010 | Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) product | |
| Regulation (EU) No 305/2011 | EN 15600-1:2010 | Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) p | |
| Regulation (EU) No 305/2011 | EN 15650:2010 | Ventilation for buildings — Fire dampers | |
| Regulation (EU) No 305/2011 | EN 15651-1:2012 | Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements | |
| Regulation (EU) No 305/2011 | EN 15651-2:2012 | Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing | |
| Regulation (EU) No 305/2011 | EN 15651-3:2012 | Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints | |
| Regulation (EU) No 305/2011 | EN 15651-4:2012 | Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways | |
| Regulation (EU) No 305/2011 | EN 15681-2:2017 | Glass in Building — Basic alumino silicate glass products — Part 2: Product standard | |
| Regulation (EU) No 305/2011 | EN 15682-2:2013 | Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 15683-2:2013 | Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard | |
| Regulation (EU) No 305/2011 | EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) — Expanded clay lightweight aggregate products (LWA) | |
| Regulation (EU) No 305/2011 | EN 15743:2010+A1:2015 | Supersulfated cement — Composition, specifications and conformity criteria | |
| Regulation (EU) No 305/2011 | EN 15814:2011+A2:2014 | Polymer modified bituminous thick coatings for waterproofing — Definitions and requirements | |
| Regulation (EU) No 305/2011 | EN 15821:2010 | Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 15824:2017 | Specifications for external renders and internal plasters based on organic binders | |
| Regulation (EU) No 305/2011 | EN 16034:2014 | Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or | |
| Regulation (EU) No 305/2011 | EN 16069:2012+A1:2015 | Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification | |
| Regulation (EU) No 305/2011 | EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods | |
| Regulation (EU) No 305/2011 | EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods | |
| Regulation (EU) No 305/2012 | EN 16510-2-1:2022 | Residential solid fuel burning appliances - Part 2-1: Roomheaters | 26/09/2025 |
| Regulation (EU) No 305/2012 | EN 16510-2-2:2022 | Residential solid fuel burning appliances - Part 2-2: Inset appliances including open fires | 26/09/2025 |
| Regulation (EU) No 305/2012 | EN 16510-2-3:2022 | Residential solid fuel burning appliances - Part 2-3: Cookers | 26/09/2025 |
| Regulation (EU) No 305/2012 | EN 16510-2-4:2022 | Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW | 26/09/2025 |
| Regulation (EU) No 305/2012 | EN 16510-2-6:2022 | Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers | 26/09/2025 |
| Regulation (EU) No 305/2011 | EN 50575:2014EN 50575:2014/A1:2016 | Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements |